Instructions

Simply remove blister package to release Mirror Wizard dampening cones. Peel off adhesive tape cover. Tape will adhere well to most clean and dry surfaces. Apply Mirror Wizard to back of mirror. Firm application pressure develops better adhesive contact and thus improves bond strength.

Ideal tape application temperature range is 70 F to 100 F (21 C to 38 C). Initial tape application to surfaces at temperatures below  50 F (10 C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. After application, the bond strength increases and approaches the ultimate bond  strength after 72 hours at 70 F.                              Actual results may vary